Working of Air conditioning tutorial

Source:  Working of Air conditioning tutorial    Tag:  cathode ray oscilloscope working principle
Here iam going to teach you a working and construction of Air conditioning and also now a days air conditioning becomes most used by peoples all over the world. And also we are going to learn how the air conitioning works and how to contruct the air conditioning . And here we are going to see the typical window type air conditioner.
An air conditioner mechanism designed to dehumidify  and extract heat from an ares. The cooling is done using a simple refrigeration cycle. Air conditioning includes both the cooling and heating of air. It also cleans the air air and controls the moisture level. An air conditioning is able to cool a building becuase it removes heat from the indoor air and transfers it outdoors. A chemical refrigerant in the system absorbs the unwanted heat and pumps it through a system of piping to the outside coil, The fan, located in the outside unit, blows outside air over the hot coil, tranferring heat from the refrigerant to the outdoor air. All the process is done by simple refrigeration cycle.

Working Principle of Air conditioning
Most of the air conditioning systems have five mechanical components:

1.Compressor
2.Expansion valve
3.Evaporatoe coil and blower
4.Chemical refrigerant
5.Condenser

The compressor (which is controlled by the thermostat) is the "heat" of the system. The compressor acts as the pump, causing the refrigerant to flow through the system. Its job is to draw in a low-pressure, low - temperature, refrigerant in a gaseous state and by compressing this gas, raise the pressure and temperature of the refrigerant. This high-pressure, high - temperature gas then flows to the condenser coil. The condenser coil is a series of piping with a fan that draws outside air cross outside the coil. As the refrigerant passes through the condenser cooil and the cooler outside air passes across the coil, the air absorbs heat from the refrigerant which causes the refrigerant to condense from a gas to a liquid state. The high-pressure, high-temperature liquid then reaches the expansion valve.
The expansion valve is the "brain" of the system, By sensing the temperature of the evaporator, or cooling coil, it allows liquid to pass through a very small orifice, which causes the refrigerant to expand to a low-pressure, low-temperature gas. This "cold" refrigerant flows to the evaporator coil. The evaporator coil is a series of piping connected to a furnace or air handler that blows indoor air across it, causing the coil to absorb heat from the air. The cooled air is then delivered to the house through ducting. The refrigerant then flows back to the compressor where the cycle starts over again. 

And the parts of Air conditioning are
1.Adjustable louvers
2.Blower
3.Partition
4.Fan
5.Compressor
6.Condenser
7.Evaporator coil
8.Filter
9.Thermostat sensor
10.Front grille
11.Control panel

The above lesson will shows you working function of Air conditioning. 
And i hope that you understand my tutorial about the Air conditioning